-
CCTV
- Ready-made CCTV kits
- HD SDI
- IP Systems
- AHD CCTV
- TVI CCTV
- CVI CCTV
- Video surveillance for transport
- Storage devices
- Portable video cameras
- Thermal, Thermal imaging sights
- Enclosures for CCTV recorders
- Cameras
- Lenses
- Brackets and Housings
- Monitors
- Devices for video transsmision, CONVERTER
- Power supply, UPS
- Pan/Tilt Scanner
- IR+LED illuminators
- cables
- anti surge protection
- silicagel
- Microphones
- Connectors
- Архив
- Alarm systems
- Access control
- Intercom systems
- Fire safety systems
- Videodoorphones, doorphones and intercoms
- Electric gate automation systems and barriers
- Networking
- Sound systems
- Switching and Server Cabinets, accessories
- Tools and accessories
- Cables covers and accessories
- Power supply and accumulators
- HDMI
- Accessories for caravans and campers
- Wiring
- Solar energy
- Wind energy
- Contacts
TSV-1000P - VIDEO SEPARATOR
SV-1000P is used as an extra security device in CCTV systems and protects CCTV equipment from the following:
- lightning discharge,
- voltage differences and strokes,
- electric currents in video signal cables.
The device eliminates signal disturbances that take place with transmissions over several hundred meters distances.
SPECIFICATIONS
|
Video bandwidth: |
9MHz / 1Vpp |
|
Sockets type: |
BNC female |
|
Gain adjustment: |
(-5) - (+5)dB |
|
Input / output impedance: |
75Ω |
|
Transmission error: |
0.75% (f=3.58MHz, Vin=1Vpp) |
|
Galvanic isolation between power supply and input signal (max. voltage): |
1000V |
|
Galvanic isolation between input and output (max. voltage): |
1000V |
|
DC plug: |
5.5 / 2.1mm |
|
Dimensions: |
61 x 120 x 30mm |
|
Weight: |
95g |
|
Current consumption: |
80mA |
|
Power: |
DC 12V |
The Fig.1 shows the SV-1000P video separator connecting diagram example. It allows to eliminate signal disturbances due to difference in voltage between camera ground and monitor ground. The voltage results from this difference can adds up to useful signal voltage. It makes low frequency disturbances (e.g. slowly vertical moving black fields). To full protect all devices connected to the line against lightning discharges the Fig.2 connecting diagram is recommended:
