- CCTV
-
Alarm systems
- Mini Alarms
- Wireless alarm systems
- GSM
- Alarm panels
- PIR detectors
- Dual detectors PIR+MW
- Glass break detectors
- Magnetic contacts
- Seismic detectors
- Water leakage detector
- Gas leak detectors
- Temperature detector
- Firealarm detectors
- Perimeter security
- Remote control sets
- Accessories
- Acoustic, optical signaling devices
- Alarm cables
- Access control
- Intercom systems
- Fire safety systems
- Videodoorphones, doorphones and intercoms
- Electric gate automation systems and barriers
- Networking
- Sound systems
- Switching and Server Cabinets, accessories
- Tools and accessories
- Cables covers and accessories
- Power supply and accumulators
- HDMI
- Accessories for caravans and campers
- Wiring
- Solar energy
- Wind energy
- Contacts
ReX2 - Radio Signal Range Extender
+ photo verification
It has a built-in tamper resistance and is equipped with a battery that provides up to 35 hours of operation without external power.
- Transmits alarms in 0.3 seconds
- Manages the devices if the hub connection is lost
- Communicates at a distance of up to 1800 m
ReX2 is a repeater of the Ajax security system radio signal that expands the boundaries of the protected area. It controls the system devices connected to it, allowing them to be placed at a considerable distance from the hub: in a multi-storey office, in a detached garage or in a large production facility. With ReX, the communication range is doubled, and the coverage area of the Ajax radio network reaches 16 km. Extends system coverage to 16 km Transmits alarms in 0.3 seconds Connects to the system in 2 minutes Increases the flexibility of the Ajax ecosystem ReX acts as a reliable link between the hub and Ajax devices. If necessary, all or only part of the sensors can work through an intelligent repeater. At the same time, the number of devices connected to ReX does not affect the speed of alarm delivery. Hub + ReX + 99 devices Hub Plus + Rex + 149 devices ReX operating range - up to 1800 meters Strengthens the security system Installing conventional repeaters increases the risk of losing an alarm signal during transmission - they become a weak link in the security system. ReX takes the reliability and resiliency of Ajax to the next level. This is the second decision-making center after the hub. ReX combines sensors into an autonomous group within the system. If for some reason the radio connection with the hub is interrupted, ReX will take control: receive an alarm signal from the sensor and activate the siren to draw attention to the incident and scare off the robber. Smart as a hub ReX runs on the intelligent OS Malevich. This operating system has already proven its reliability — it is used in Ajax hubs that provide security for hundreds of thousands of objects around the world. ReX knows the same as the Ajax control panel, manages the connected devices of the system, makes decisions with lightning speed, and is always on guard. The capabilities and role of ReX in the security system will grow with OS Malevich updates - free for all users. Powerful ARM processor for mission-critical tasks Cargo protocol for continuous data synchronization with the hub Replication of information about the system for instant response to events Over the air firmware updates for new features Ready to face intruders ReX is protected from attacks at the software and hardware levels. The operating system OS Malevich, under which ReX runs, is immune to viruses and exploits, which eliminates malfunctions due to interference with the firmware code. ReX cannot be hacked by intercepting the signal - the device receives and transmits information in encrypted form. A sudden power outage will not be a problem - ReX has a powerful battery that will not weaken the protection of the object. Works up to 35 hours after a power outage All data is encrypted Reports jamming and unauthorized opening of the hull Installed in 2 minutes To connect ReX to the system, you need to read the QR code, name the device and turn it on. After that, it remains only to select the Ajax devices that will work through the relay. ReX does not need to be disassembled for installation - the repeater is attached to the SmartBracket with one simple movement. Easy connection via QR code Fast Mount SmartBracket Mobile application for setup and tests |
|
Max number of connected ReX per hub |
Hub — 1, Hub 2 — 5, Hub Plus — 5 |
Power supply |
110~240 V AC, 50 / 60 Hz |
Backup battery |
Li-Ion 2 A⋅h (up to 35 hours of autonomous operation) |
Tamper protection |
Available |
Frequency band |
868.0~868.6 MHz |
Compatibility |
Operates only with Hub, Hub Plus and Hub 2 featuring OS Malevich 2.7.1 and later |
Maximum radio signal power |
Up to 25 mW |
Radio signal modulation |
GFSK |
Radio signal range |
Up to 1,800 m (any obstacles absence) |
Operating temperature range |
From -10°С to +40°С |
Operating humidity |
Up to 75% |
Overall dimensions |
163 × 163 × 36 mm |
Weight |
330 g |