- CCTV
- Alarm systems
- Access control
- Intercom systems
- Fire safety systems
- Videodoorphones, doorphones and intercoms
- Electric gate automation systems and barriers
- Networking
- Sound systems
- Switching and Server Cabinets, accessories
- Tools and accessories
- Cables covers and accessories
- Power supply and accumulators
- HDMI
- Accessories for caravans and campers
- Wiring
- Solar energy
- Wind energy
- Contacts
CG17 - 4G GSM Alarm panel 4 zones 8 areas 2 PGM
• Area count: 8 areas
• PGM outputs: 2 PGM outputs on mainboard (can be expanded)
• Keyboards: -
• Mobile application support: PROTEGUS
CG17 is a multifunctional security control panel with an integrated celullar communicator.
With the CG17 you can:
- Install a simple security system that can be monitored and controlled remotely.
- Control various equipment remotely (e.g. heating and ventilation systems, automatic gates) and monitor temperature.
- Notify users about events.
- Send event notifications to the receiver of a security company.
|
Parameters |
Description |
|
GSM modem frequencies |
850 / 900 / 1800 / 1900 MHz |
|
3G modem frequencies |
800 / 850 / 900 / 1900 / 2100 MHz |
|
Power supply voltage |
16-24 VDC, 16-18 VAC |
|
Current consumption |
50 mA (stand-by), Up to 200 mA (transmitting) |
|
Communication with ARC |
Encrypted TCP/IP or UDP/IP, SMS, DC-09_2007, DC-09_2012 |
|
Battery charging current |
Max 500 mA |
|
Event encryption, key |
TRK / 6 symbol key |
|
Memory |
Up to 60 messages |
|
Inputs (max internal) |
Up to 4 selectable type input: NC, NO, EOL (10kΩ) |
|
Outputs (max internal) |
Up to 5 x OC type outputs, (1 OUT, 2 OUT, 3 OUT – 100 mA; 4 OUT, 5 OUT – 1 A) |
|
Partitions (Areas) |
8 |
|
Event transmission |
Contact ID codes |
|
Encryption key |
6 symbols encryption key |
|
Operating environment |
From -10 °C to 50 °C, with relative air humidity 80% when +20 °C |
|
Dimensions |
95x65x25 mm |
|
Weight |
0.10 kg |
Features
Messages to the security company
- Reports events to TRIKDIS software or hardware receivers which are capable of working with any monitoring software.
- Can report events to SIA DC-09 receivers.
- In case connection to primary channel is lost, can send to backup receiver.
- Can report events to the central monitoring station using SMS messages. Extremely useful because it works even when IP connectivity is disrupted in the mobile operator’s network.
- Cellular network jamming recognition.
- Can simultaneously report events to the security company’s receiver and work with the Protegus app. Possible to set priority for sending events to central monitoring station.
Messages to users
- Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.
- Sends SMS messages about events.
- “Push” and special sound event notifications using the Protegus application.
System and output control
- Using Protegus app.
- Using contact (iButton) key reader.
- By calling the device’s phone number.
- Using SMS messages.
- Using an automatic “if…then” algorithm. E.g. when an input is enabled or the temperature exceeds a certain limit, an output will be turned on.
Expander, GPS receiver and battery support
- iO series expanders, which increase the number of inputs (IN) and outputs (OUT).
- GPS receiver (useful for protecting ATMs and vending machines).
- Backup power and charging of 12 V battery.
Settings and installation
- Quick and simple installation.
- Configuration of device either using an USB cable or remotely using TrikdisConfig software.
- Remote updating of firmware.
- Two types of access levels (accounts), for the installer and for the administrator.
Inputs and outputs
- 1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or output (OUT) terminals.
- One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.
- Using iO series expanders, the number of inputs (IN) or outputs (OUT) can be increased to 12.
