118.53 EUR TSV-1000/4-G - VIDEO SEPARATOR

TSV-1000/4-G - VIDEO SEPARATOR

Product info form

Цена	118.53 EUR
Код	248611-1WF51

В корзину, задать вопрос

The SV-1000/4-G video separator is designed for additional protection of four signal lines, e.g. in CCTV installations, securing the expensive devices (cameras, DVRs, monitors etc.) from:

lightning discharges,
voltage differences and strokes,
electric currents in video signal cables.

The device eliminates signal disturbances that take place with transmissions over several hundred meters distances.
After remove the cover of the case you can mount the device to the wall via wall screws (not in the set).

SPECIFICATIONS

Video bandwidth:	9MHz / 1Vpp
Sockets type:	8 x BNC female
Input / output impedance:	75Ω
Gain adjustment:	(-5) - (+5)dB (adjust potentiometers are available after remove the cover of the case)
Galvanic isolation among signal inputs and among signal outputs:	1000V (peak)
Galvanic isolation between signal inputs and outputs:	1000V (peak)
Galvanic isolation between power and signal inputs / outputs:	1000V (peak)
Power:	12V DC / 300mA
Dimensions:	213 x 36 x 93mm
Weight:	310g

Front view:

Top view:

The gain can be adjusted independently by a potentiometer for each output:

Elimination the signal disturbances existing due to difference in voltage between camera ground and monitor ground. The voltage results from this difference can adds up to useful signal voltage. It makes low frequency disturbances (e.g. slowly vertical moving black fields):

To full protect all devices connected to the line against lightning discharges the following connecting diagram is recommended:

The galvanic isolation of the SV-1000/4-G:

The device's case has a removable cover:

Обратно