287.00 EUR FLR100 - Оптический дымозащитный барьер 100м IP55 11-27Vdc

Product info form

Цена	287.00 EUR
Код	FLR100

Нет на складе

• Электропитание: 10,8 - 26,8 В пост.
• Рабочее расстояние: 100 м
• Защита: IP55

Model	FLR100
Power Supply Voltage	10.8 – 26.8 Vdc
Consumption in Idle @ 24 Vdc (Tx, Rx, Tx/Rx)	55 mA, 45 mA, 55 mA
Consumption in Idle @ 12 Vdc (Tx, Rx, Tx/Rx)	45 mA, 35 mA, 45 mA
Consumption in Alarm @ 24 Vdc (Rx, Tx/Rx)	50 mA, 60 mA
Consumption in Alarm @ 12 Vdc (Rx, Tx/Rx)	40 mA, 50 mA
Consumption in Fault @ 24 Vdc (Rx, Tx/Rx)	35 mA, 45 mA
Consumption in Fault @ 12 Vdc (Rx, Tx/Rx)	30 mA, 40 mA
Pre-Alarm Obscuration Thresholds	20%, 25%, 30%, 35%
Alarm Obscuration Threshold	35%
Minimum Operating Distance	5 m
Maximum Operating Distance	150 m (separate Tx and Rx) / 100 m (Tx/Rx and passive reflector)
Wavelenght of the Transmitter Beam	890 nm
Tolerance to the Beam Misalignment (separate Tx and Rx)	± 1°
Tolerance to the Beam Misalignment (TxRx unit and passive reflector)	± 0.5° ; ± 5°
Pre-Alarm Relay	1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Alarm Relay	1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Fault Relay	1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Conventional Detection Circuit – Input Voltage Range	10 – 20 Vdc
Conventional Detection Circuit – Consumption in Pre-Alarm Condition	20 mA @ 20 Vdc
Conventional Detection Circuit – Consumption in Alarm Condition	40 mA @ 20 Vdc
Conventional Detection Circuit – Reset Pulse Duration	200 ms
Operating Temperature	From -10°C - 55°C
Relative Humidity	95%
Protection Grade	IP55
Passive Reflector Dimensions	10 x 10 cm / 20 x 20 cm / 30 x 20 cm
Dimensions	248 x 122 x 120 mm
Weight	900 g