87.00 EUR E16 - Komunikator Ethernet 3 zaciski IN / OUT 12Vdc

E16 - Komunikator Ethernet 3 zaciski IN / OUT 12Vdc

Product info form

Cena	87.00 EUR
kod	009078

Dodaj do koszyka, zadaj pytanie

• Communication with control panel: Via data bus / via serial port (two-way communication)
• Data channel: Ethernet IEEE802.3, 10 Base-T, port RJ45
• Data communication protocol: TRK / DC-09_2007 / DC-09_2012
• Inputs and outputs: 3 dual purpose terminals (IN / OUT) ; NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL (2,2 kΩ)
• Mobile application support: PROTEGUS

“Ethernet” communicator E16 directly connects to supported DSC, Paradox, UTC Interlogix (CADDX), Innerrange, Texecom, Honeywell, Crow and Pyronix alarm panels.

Communicator transmits full event information to the Central Monitoring Station.

Communicator also works with Protegus application. With Protegus users can control their alarm system remotely and get notifications about security system events. Protegus app is compatible with all security alarm panels from various manufacturers that are supported by the E16 communicator. Communicator can transmit event notifications to the Central Monitoring Station and work with Protegus simultaneously.

Parameter	Description
Dual purpose terminals [IN/OUT]	3, can be set as either NC; NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL (2,2 kΩ) type inputs or open collector (OC) type outputs with current up to 0,15 A, 30 VDC max. Expandable with iO series expanders.
Power supply voltage	10-18 V DC
Current consumption	100 mA (on standby) Up to 250 mA (while sending data)
Ethernet connection	IEEE802.3, 10 Base-T, RJ45 socket
Transmission protocols	TRK, DC-09_2007, DC-09_2012
Memory	Up to 60 messages
Changing settings	With TrikdisConfig computer program remotely or locally via USB Mini-B port
Operating environment	Temperature from -10 °C to 50 °C, relative humidity – up to 80% at +20 °C
Communicator dimensions	88 x 65 x 26 mm
Weight	80 g

Features

Sends events to monitoring station receiver:

Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
Can send event messages to SIA DC-09 receivers.
Connection supervision by polling to IP receiver every 30 seconds (or by user-defined period).
The backup channel, that will be used if connection with the primary channel is lost.
With parallel communication channels events can be sent to two receivers at the same time.
When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

“Push” and special sound notifications informing about events.
Remote system Arm/Disarm.

Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).

Remote temperature monitoring (with iO or iO-WL expanders).
Different user rights for administrator and installer.

Notifies users:

Users can be notified about events with Protegus app.

Controllable outputs and inputs:

3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
Outputs controlled by the Protegus app.
Add additional inputs and controllable outputs with wired and wireless iO expanders.

Quick setup:

Settings can be saved to file and quickly written to other communicators.
Two access levels for configuring the device for CMS administrator and for the installer.
Remote configuration and firmware updates.

Telewizja dozorowa. Kontrola dostępu. Systemy alarmowe. Systemy sygnalizacji pożaru. Wideodomofony domofony i interkomy. Falowniki. Panele słoneczne. kontrolery słoneczne. Baterie. Ochronniki przeciwprzepięciowe. Awaryjne źródła zasilania. Urządzenie ładujące.

E16 - Komunikator Ethernet 3 zaciski IN / OUT 12Vdc