Solar PWM charging regulator SOL-10S, 12/24 - 10А
The PWM solar controller is a converter used to control the operation of photovoltaic systems. The task of the solar regulator is to ensure the proper characteristics of the charging current of the batteries, protecting them against too deep discharge or overcharging. Solar regulators guarantee increased battery life in the SOLAR PANEL / Battery system. The controller is equipped with a photocell function (it has the option of switching the output on in relation to sunsets and sunrise).
The solar regulator protects the battery against deep discharge by disconnecting the source of energy consumption after exceeding the critical voltage of 10.8V for the battery. When the battery is fully charged, the regulator disconnects the power from the photovoltaic panels when the battery voltage is in the range of 14V-14.5V.
The solar regulator protects the battery against deep discharge by disconnecting the source of energy consumption after exceeding the critical voltage of 10.8V for the battery. When the battery is fully charged, the regulator disconnects the power from the photovoltaic panels when the battery voltage is in the range of 14V-14.5V.
Nominal voltage: 12V / 24V (auto detection)
Supported battery type: AGM / Gel
Saturation
voltage: AGM: 14.4V / 28.8V (25 ° C) Gel: 14.2V / 28.4V (25 ° C)
Gasification voltage: AGM: 14.6V / 29.2V (25 ° C) Gel: 14.4V / 28.8V (25
° C)
Backup voltage: AGM: 13.8V / 27.6V (25 ° C) Gel: 13.8V / 27.6V (25 ° C)
LVD disconnect voltage: 10.8V / 21.6V
Reconnection voltage: 12.6V / 25.2V
Protection against reverse connection: fuse 25A
Maximum charging current: 10A
Maximum load current: 10A
Own current consumption: 9mA
Working temperature: -40 ° C ~ + 50 ° C
Temperature compensation: 12V: 24mV / ° C 24V: 48mV / ° C
Maximum wire size: 16mm / 6AWG
Degree of protection (IP): IP30
Dimensions LxWxH [mm]: 150x82x50
Weight [kg]: 0.35
