Видеонаблюдение. Системы видеонаблюдения. Скрытое видеонаблюдение. Камеры видеонаблюдения, IP камеры, Сигнализация. Инверторы. Солнечные панели. Солнечные контроллеры. Аккумуляторы. Стабилизаторы напряжения. Источники аварийного питания. Зарядные устройства.Ветрогенераторы

Product info form

Цена	76.58 EUR
Код	245161-KP7SX

В корзину, задать вопрос

Нет на складе

продукт недоступен

Выберите вариант

The RV-8/16PR video splitter allows to distribute video signal from eight inputs to sixteen outputs according to configuration set by the user. The RV-8/16PR has the default array set as eight independent video splitters 1/2 (Fig. 1). It is easy to re-program the array using jumpers located on the front panel. There are 22 combinations available. The example four ones are given in the figures. When programming, the table of possible combinations should be employed. The vertical jumpers activate respective inputs and the horizontal ones - connect respective outputs. The splitter is designed for continuous indoor operation. The RV-8/16PR works with any CCTV cameras. The LED informs about power on. Splitters can be connected in series.

Example: There is a need for 4 video splitters 1/4 (one input, four outputs). On the left side of the table one can find the line containing required devices: 4 x 1/4 (position LP5). The fields with "1/4" forks show inputs (the upper part of the table) and assigned to them outputs (the lower part of the table). The fields with arrows show which outputs are consigned to the same input seen on the left. In the right part of the table the columns are assigned to the respective jumpers. In the same line there is given information about which jumpers have to be put (+), and which are unused (-). The example is shown in Fig. 2.

SPECIFICATIONS

The splitter configuration table:

Click on the table to enlarge

4 examples of splitter configuration:

Front view:

Rear view:

Inside view (from the top):

The way of remove the cover:

Обратно