- Telewizja dozorowa
- Systemy alarmowe
- Kontrola dostępu
- Interkomy kasowe
- Systemy sygnalizacji pożaru
- Domofony i wideodomofony
- Systemy automatyki bramowej i bariery
- Sieci LAN i Wi-Fi
- System ostrzegania
- Szafy przełączające i serwerowe, akcesoria
- Narzędzia
- Przewody, listwy i łączniki, trzymaki
- Zasilacze, Akumulatory, Transformator
- HDMI
- Akcesoria do przyczep kempingowych i kamperów
- Montaż elektryki
- Energia słoneczna
- Energia wiatrowa
- Kontakt
REM3 Hand-Held Two-Way Remote Keypad
Features
Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
Supports StayD
System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system.
Configure which partitions the REM3 arms/disarms
Built-In Transceiver (433MHz or 868MHz)
Independent Arm, Sleep, Stay and Off buttons and LED display per partition
Control up to 6 PGMs and/or generate panics
Keypad Mode: Requires code entry
Remote Mode: One-touch arming / Disarming
Installer Diagnostic Mode:
Partition 1 LEDs = Signal Strength Display
Partition 2 LEDs = RF Interference Display
Provides visual and auditory feedback of system status
Press the Status button to receive system status
Label to identify remote control owner
Compact, water-resistant design
Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)
EN50131 grade 3
Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
Supports StayD
System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system.
Configure which partitions the REM3 arms/disarms
Built-In Transceiver (433MHz or 868MHz)
Independent Arm, Sleep, Stay and Off buttons and LED display per partition
Control up to 6 PGMs and/or generate panics
Keypad Mode: Requires code entry
Remote Mode: One-touch arming / Disarming
Installer Diagnostic Mode:
Partition 1 LEDs = Signal Strength Display
Partition 2 LEDs = RF Interference Display
Provides visual and auditory feedback of system status
Press the Status button to receive system status
Label to identify remote control owner
Compact, water-resistant design
Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)
EN50131 grade 3
