- Videonovērošana
- Apsardzes signalizācija
- Kontroles sistēmas
- Sarunu sistēmas
- Ugunsdzēsības sistēmas
- Audio un Video domofoni
- Automātika vārtiem un barjeras
- Tīkla iekārtas
- Apskaņošanas sistēmas
- Kommutācijas un Serveru skapji, piederumi
- Instrumenti
- Kabeļi,aizsegi,caurules un piederumi
- Barošanas bloki,transformatori un akumulātori
- HDMI
- Piekabju un kemperu piederumi
- Elektromontāža
- Saules enerģija
- Vēja enerģija
- Kontakti
PCS250 - GSM/GPRS raidītājs
• Compact, sleek design
• Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
• Report via text message (up to 16 cell phone numbers)
• Control panel communication supervision
• End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
• Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)
• Simple installation with 4-wire serial connection
• Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
• 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
• Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this
• Report via GSM (CID, SIA)
• EN 50131 grade 3
Telephone numbers to reporting events: |
max. 16 |
Number of supported SIM cards: |
2 |
Event codes sending messages type: |
SMS, GPRS, Ademco Contact ID, CID, SIA |
Transmitter power: |
· 2 W @ 850 / 900 MHz · 1 W @ 1800 / 1900 MHz |
Main features: |
· Reporting via GSM to the monitoring station · Sending the text messages (SMS) with event details · Remote configuration of module via GPRS · The ability of remote arm/disarm the system by sending a text message (SMS) · Cooperation with the VDMP3 module allows to voice control of the system · Function of radio transmission encoding with 128 / 256-bit encryption key · Remote update of module software |
Power supply: |
12 V DC |
Current consumption: |
· 100 mA (Standby mode) · 1200 mA (max) |
Operation temp: |
0 °C ... 50 °C |
Dimensions: |
97 x 171 x 44 |
Weight: |
0.202 kg |